手控无极调速，较脚控操作易把控。直身手柄稳定性强，易把握，不易偏离方向。

Straight body strong stability,easy to handle,not deviate direction.

运用人体工程学原理，操作舒适，无疲劳感。

Use principle of human body engineering,operating comfortable,no fatigue.

更换锯片，不需拆卸锯架。

Replace the saw blade,no need to disassemle the saw frame.

可选配翻修胸骨锯，用于二次开胸。

Optional renovation sternum saw,for the second thoracotomy.

锯片保护架可旋转360度，供医生选择锯开胸骨的方向（推或拉）。

Sawblade protection can be rotated 360 degrees for doctor choose sawed the sternum(push or pull).

一支马达同时具备三个特点（劲大、个小、转速高）。

A motor has three characteristics(strength,a small,high speed).

马达转速高：35000rpm/min

马达扭矩强：1600g.cm

马达体积小：马达直径φ26mm，易把握。

Motor speed high:35000rpm/min.

Motor torque strong:1600g.cm.

Motor small size:motor diameter φ26mm,easy to grasp.

先进的驱动方式：

Advanced driving mode:

马达直接驱动胸骨锯，所以无功率丢失，能实现效率最大化。

Motor direct drive sternum saw.so no power loss,can achieve maximum efficiency, energy saving and consumption reduction.

手柄及胸骨锯，体积小，重量轻，噪音低，震动小，既可用于成人开胸又可用于小儿开胸。

Handle and sternum saw,small volume,light weight,low noise,small vibration,can be used for adult thoracic and can be used for pediatric chest.

柔性线缆：可任意弯曲。

Flexible cable:can be arbitrary bending.

耐高温高压消毒：马达及连线可耐132℃高温高压消毒。

Autoclavable:motor and connections can withstand 132℃ high temperature and high pressure disinfection.

稳定性强：无极调速、匀速启动、无抖动。

Strong stability:stepless speed regulation,uniform start,no jitter.